1pc XH-W3002 Temperature Controller AC110V-220V DC12V/24V LED Digital Control Thermostat Microcomputer Switch Thermoregulator Sensor(DC 12V)

Temperature ControllersXH-W3002 Temperature Controller AC110V-220V DC12V/24V LED Digital Control Thermostat Microcomputer Switch Thermoregulator SensorFeature:The high-brightness digital tube clearly displays, whether it is used during the day or at night, it can be read clearlyThe sensor can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at willABS material shell, exquisite and beautiful, high mechanical strength, good electrical performance, anti-aging-50~110 ultra-wide temperature control range, can be used in various temperature control fields, 0.1 temperature control accuracy, to meet your control needsWiring input and output design, more convenient to use in various industrial control equipment, multi-strand wire 300V/20A excess configuration, safe and reliableSpecifications:Product name: Microcomputer temperature controllerProduct Model:XH-W3002Temperature measurement range: -50~110Temperature control range: -50~110Temperature measurement accuracy: ±0.2Temperature control accuracy: ±0.1Measurement input: NTC10K L=1 meter waterproof probeInput power: 12/24/220VOutput power: 120/240/1500Woutput type: direct outputOutput capacity: max 10AInstallation hole distance: 73mm (diameter 4mm)Appearance size: 60*45*31mmSet Up Using:Code and function introductionP0 set startup temperaturePress the setting button once to enter the internal menu, the default display is P0, press the setting button again, and set the required startup temperature by pressing the up and down buttons.P1 set stop temperaturePress the setting button once to enter the internal menu, the digital display is P0, switch to P1 by pressing the up and down buttons, press the setting button again, and set the desired stop temperature by pressing the up and down buttons.P2 Set temperature correctionEnter the internal menu in the same way, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature.P3 set delay startEnter the internal menu in the same way, switch to P3 by pressing the up and down keys, press the setting key again, and set the required delay time (unit is minutes) by pressing the up and down keys. Delay start is generally used for compressor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compressor back pressure, the general setting value is 3-6 minutes. If you are not used to control the compressor or do not need delay time function, skip this item directly.Package Included:Thermostat X1==========Is Smart Device : NoUse : IndustrialDisplay Size : 1.9 Inches & UnderProduct name : Microcomputer temperature controllerProduct model : XH-W3002Temperature measurement range : -50 to 110Temperature control range : -50 to 110Temperature measurement accuracy : ±0.2Temperature control accuracy : ±0.1Measurement input : NTC10K L=1 meter waterproof probeInput power : DC12V/24 AC110V-220VOutput power : 120/240/1500WOutput type : direct outputOutput capacity : max 10AInstallation hole distance : 73mm (diameter 4mm)Appearance size : 60*45*31mm

• Temperature Controllers
• 1pc XH-W3002 Temperature Controller AC110V-220V DC12V/24V LED Digital Control Thermostat Microcomputer Switch Thermoregulator Sensor